home *** CD-ROM | disk | FTP | other *** search
/ NetNews Offline 2 / NetNews Offline Volume 2.iso / news / comp / sys / amiga / hardware-part1 / 3966 < prev    next >
Encoding:
Internet Message Format  |  1996-08-05  |  2.1 KB

  1. Path: grapool30.rz.uni-frankfurt.de!news
  2. From: raftopou@stud.uni-frankfurt.de (Joerg Raftopoulos)
  3. Newsgroups: comp.sys.amiga.hardware
  4. Subject: Re: Amiga 3000 troubles
  5. Date: 11 Feb 96 01:34:44 +0100
  6. Organization: J. W. Goethe-Universitaet Frankfurt/Main
  7. Message-ID: <1646.6615T94T2219@stud.uni-frankfurt.de>
  8. References: <4f6p8u$7gi@math.mps.ohio-state.edu>
  9. NNTP-Posting-Host: dialin154.rz.uni-frankfurt.de
  10. X-Newsreader: THOR 2.22 (Amiga;TCP/IP) *UNREGISTERED*
  11.  
  12.  
  13.  JG> Last summer my Amiga and modem were damaged during an electrical storm.
  14.  JG> I got the modem fixed (it was on warranty thank goodness) but my Amiga
  15.  JG> is still crippled.  Everything seems to work ok except for the graphics.
  16.  JG> Here are some descriptions of what is wrong:
  17.  
  18.  JG>    1) When I resize a window, the edges of the window get
  19.  JG>       trashed and leave lots of extra lines around
  20.  
  21.  JG>    2) When text is scrollin on the screen, extra dots appear
  22.  JG>       or something dots disappear.  This can make reading text
  23.  JG>       difficult
  24.  
  25.  JG>    3) During hard drive access, the graphics troubles seem to
  26.  JG>       increase in the form of flickering screens etc. but the
  27.  JG>       hard drives work properly as far as I can tell
  28.  
  29.  JG> Can someone out there help me identify the trouble and recommend
  30.  JG> how to fix it?  Perhaps someone has some diagnostic software I
  31.  JG> could run?
  32.  
  33.  
  34. won`t be easy...
  35.  
  36. i recently fixed an amiga 3000 desktop with a similar problem. i had to change
  37. u 202, labeled PAL 390526-02. that pal generates a strobe for chipmem access.
  38.  
  39. best way to track down the fault would be to get another amiga 3000 and change
  40. the socketed chips one by one. start with chip related devices like agnus
  41. (use plcc chip puller!) , denise etc. next step would be drams and pals.
  42. finaly you switch to the leftover chips like buster, garry and so on.
  43.  
  44. no success? now you are up to do a good solder job, change chipram bus related
  45. drives (for schematics consult your "introducing the amiga 3000" manual,
  46. appendix e)
  47.  
  48. if you aren`t good a soldering: forget it and consult your local amiga dealer.
  49.  
  50.  
  51.  
  52. bye and good luck
  53.  
  54.